[BlueOnyx:01290] Re: Cannot see vsite from the internet

[Support]

Hi all,

I sorted this out in the end..... I had ETH1 pointed to the internet and
ETH0 pointed to the VPN but I needed to have the reverse setup.

Once I changed it over the BQ box worked as expected.

Thanks

Tony

-----Original Message-----
From: blueonyx-bounces at blueonyx.it [mailto:blueonyx-bounces at blueonyx.it] On
Behalf Of Support
Sent: Monday, 25 May 2009 10:53
To: 'BlueOnyx General Mailing List'
Subject: [BlueOnyx:01289] Cannot see vsite from the internet

Hello,

I have a BQ box behind a Bridged Modem/IPCOP installation and I have
forwarded port 80 to the BQ box and I see in TCPDUMP (on the BQ machine);

[root at xxxxxx ~]# tcpdump -lnn port 80
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
15:54:54.044762 IP 203.194.x.x.1247 > 192.168.0.200.80: S
1843694543:1843694543(0) win 16384 <mss 1400,nop,nop,sackOK>
15:54:57.244309 IP 203.194.x.x.1247 > 192.168.0.200.80: S
1843694543:1843694543(0) win 16384 <mss 1400,nop,nop,sackOK>
15:55:03.775379 IP 203.194.x.x.1247 > 192.168.0.200.80: S
1843694543:1843694543(0) win 16384 <mss 1400,nop,nop,sackOK>

3 packets captured
3 packets received by filter
0 packets dropped by kernel

... so I know that the TCP connection is correct.

Then I nano /etc/httpd/conf/httpd.conf and get;

# 
# Controls who can get stuff from this server.
#     
    Order allow,deny
    Allow from all

... so I cannot figure out why Apache simply does not show me the vsite?

I am using the correct FQDN from the internet and the vsite works on the
local lan so I am at a loss as to why this is happening.

Does anyone have any ideas??????

Regards

Tony


_______________________________________________
Blueonyx mailing list
Blueonyx at blueonyx.it
http://www.blueonyx.it/mailman/listinfo/blueonyx