[BlueOnyx:10312] Re: 5108R to 5106R Migration Failure

[Richard Morgan]

Thanks Michael

This worked a treat and got me out of the pickle rather nicely.

Cheers, Richard

----- Original Message ----- 
From: "Michael Stauber" <mstauber at blueonyx.it>
To: "BlueOnyx General Mailing List" <blueonyx at mail.blueonyx.it>
Sent: Monday, April 23, 2012 11:19 AM
Subject: [BlueOnyx:10304] Re: 5108R to 5106R Migration Failure


> Hi Richard,
>
>> It seems I'm getting a problem migrating sites from 5108R to 5106R with
>> cmuImport... the log is reporting 'cannot adjust to this platform'.
>
> I just tested it and can confirm the problem.
>
>> INFO: /usr/sbin/cmuImport running version: 2.82
>
> Meh, OK. The wrong version number is still listed in one of the current
> scripts. That's no big deal and nothing to worry about.
>
>> INFO: Session ID is 29089
>> INFO: Modified files will be renamed filename.29089
>> INFO: /usr/sbin/cmuImport running in directory: /home/restore
>> INFO: Adjustment : Platform = 5108R build = 5106R
>> INFO: AdjustCommand = /usr/cmu/scripts/5160Radjust.pl
>> INFO: AdjustCommand = /usr/cmu/scripts/5161Radjust.pl
>> ERROR: Cannot adjust to this platform
>
> I will be working on an updated CMU which will allow you to migrate from 
> 5108R
> to 5106R or 5107R, too.
>
> Until it is released, do this to fix the problem:
>
> Edit /usr/cmu/perl/Global.pm and find this section:
>
> %adjustPath = (
>               Qube2 => 'Qube3',
>               RaQ2 => 'RaQ3',
>               RaQ3 => 'RaQ4',
>               RaQ4 => 'RaQXTR',
>               RaQXTR => 'RaQ550',
>               RaQ550 => 'TLAS1HE',
>               TLAS1HE => '5100R',
>               '5100R' => 'TLAS2',
>               'TLAS2' => '5106R',
>               '5106R' => '5107R',
>               '5107R' => '5108R',
>               '5108R' => '5160R',
>               '5160R' => '5161R'
>               );
>
> Replace it with this:
>
> %adjustPath = (
>               Qube2 => 'Qube3',
>               RaQ2 => 'RaQ3',
>               RaQ3 => 'RaQ4',
>               RaQ4 => 'RaQXTR',
>               RaQXTR => 'RaQ550',
>               RaQ550 => 'TLAS1HE',
>               TLAS1HE => '5100R',
>               '5100R' => 'TLAS2',
>               'TLAS2' => '5106R',
>               '5106R' => '5107R',
>               '5107R' => '5108R',
>               '5108R' => '5106R',
>               '5108R' => '5107R',
>               '5108R' => '5160R',
>               '5160R' => '5161R',
>               '5108R' => '5106R',
>               '5106R' => '5107R',
>               '5107R' => '5108R'
>               );
>
>    # Note: The old adjustPath was just from the oldest model to the 
> newest.
>    # This only allowed migrations from an old platform to a newer. But not
>    # going from 5108R 'down' to 5106R - for example.
>    # So at the end of the old adjustPath (which ended with 5161R) I added
>    # 5108R again and make it adjustable to the bottom end of the supported
>    # platform list: 5106R.
>
> That will then allow you cmuImport the 5108R dump on 5106R.
>
> I'll release an updated CMU sometime this week, but I want to give the 
> changes
> some more testing first.
>
> -- 
> With best regards
>
> Michael Stauber
> _______________________________________________
> Blueonyx mailing list
> Blueonyx at mail.blueonyx.it
> http://mail.blueonyx.it/mailman/listinfo/blueonyx