[BlueOnyx:02662] Re: Networ IP

[fastreplies]

Well, I found the problem and it's ain't config related.

My Save Button doesn't work for some reason.
Even if I try to Shudown server, after it ask me Yes or No and I say Yes
it bounce me back to default screen

Any suggestions?

Cheers
fastreplies

----- Original Message ----- 
From: "Gerald Waugh" <gwaugh at frontstreetnetworks.com>
To: "BlueOnyx General Mailing List" <blueonyx at blueonyx.it>
Sent: Thursday, October 15, 2009 12:19 PM
Subject: [BlueOnyx:02649] Re: Networ IP


> On Thursday 15 October 2009 11:49, Michael Stauber wrote:
>> Hi fastreplies,
>>
>> > Screen shows only old server name but no IP
>>
>> Yeah, then you're kinda stuck. You could connect to the serial port with 
>> a
>> serial cable and a terminal program and troubleshoot it from there. It
>> should give you a root prompt, provided you use the right connection
>> settings and the right terminal. You may need to press return twice to
>> establish the connection.
>>
>> It has been like 3 years since I last had to use this method to "talk" to 
>> a
>> RaQ4 and I don't remember all the gory deatils like what the connection
>> settings were. Something standard like 9600, 8N1 or thereabouts ought to
>> work.
>
> 115.2kb, 8data bits 1, stop bit, no parity
> no hardware or software handshaking
>
>> Then - once connected - you need to fix the network settings by hand. You
>> should find them in /etc/sysconfig/network and /etc/sysconfig/network-
>> scripts/ifcfg-eth0.
>
> -- 
> Gerald
> _______________________________________________
> Blueonyx mailing list
> Blueonyx at blueonyx.it
> http://www.blueonyx.it/mailman/listinfo/blueonyx