[BlueOnyx:13440] Re: Help with BlueOnyx setup...Reply to: Digest, Vol 55, Issue 39 (2)

[rodrigo ordonez]

At this point you might ant to  try changing your ethernet cable and rebooing your switch, check for loops on ports

And that the switch is connected to the router the issue might be somewhere else and not on the server , and keep in mind that there might be more than 1 problem 

Hth

Rodrigo o

Servicio email BlackBerry® xnet

-----Original Message-----
From: Dudi Goldenberg <dudi at kolcore.com>
Sender: blueonyx-bounces at mail.blueonyx.it
Date: Tue, 30 Jul 2013 12:06:20 
To: BlueOnyx General Mailing List<blueonyx at mail.blueonyx.it>
Reply-To: BlueOnyx General Mailing List <blueonyx at mail.blueonyx.it>
Subject: [BlueOnyx:13439] Re: Help with BlueOnyx setup...Reply to: Digest,
	Vol 55, Issue 39 (2)

Are you sure that the router is on 192.168.0.1?

I'd run a quick test to see...

Try dhclient eth0 - if you get no response, try dhclient eth1.

You could also run /root/network_settings.sh and set the machine to DHCP.

If you get no response from the router's DHCP server, then you have some infrastructure issues.

Regards,

D.

-----Original Message-----
From: blueonyx-bounces at mail.blueonyx.it [mailto:blueonyx-bounces at mail.blueonyx.it] On Behalf Of gen at ercuk.com
Sent: Tuesday, July 30, 2013 14:29
To: blueonyx at mail.blueonyx.it
Subject: [BlueOnyx:13438] Help with BlueOnyx setup...Reply to: Digest, Vol 55, Issue 39 (2)

Thanks: Dudi Goldenberg

I forgot to say: 
That I've changed this servers static IP address to: 192.168.0.110 
(and I reserved it in the router)
so that it doesn't clash with the P3 servers IP of: 192.168.0.100

Thanks
_______________________________________________
Blueonyx mailing list
Blueonyx at mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx


_______________________________________________
Blueonyx mailing list
Blueonyx at mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx