[BlueOnyx:02068] Re: Can not login SSH in local network

[T. K. Hughes]

I can telnt but not SSH in the internal network. 
  ----- Original Message ----- 
  From: T. K. Hughes 
  To: BlueOnyx General Mailing List 
  Sent: Wednesday, August 12, 2009 3:37 PM
  Subject: Re: [BlueOnyx:02063] Re: Can not login SSH in local network


  sorry for last post.  wrong command. I get a lot of info that will not stop moving on both eth0 and eth1.  Everything looks fine.
    ----- Original Message ----- 
    From: Michael Stauber 
    To: BlueOnyx General Mailing List 
    Sent: Wednesday, August 12, 2009 3:24 PM
    Subject: [BlueOnyx:02063] Re: Can not login SSH in local network


    Hi Tommy,

    > I can login fine outside the network with any user/pass.  I can not login
    > in network for some reason.  Under The GUI I can not get a login screen.  I
    > get a error box.

    OK, so it's neither pam_abl or a firewall. Can you ping the servers internal 
    IP from your internal network?

    Or can you ping from the server to an IP in your internal network?

    If you use "eth1" on the server to hook the box up with the internal network 
    and use "eth0" for the hookup with the internet, then you might want to check 
    if "eth1" is active and configured correctly.

    If it is, run "tcpdump -i eth1 -n" to see if it show *any* network activity at 
    all.

    If nothing shows even after a while, then it could still be some config or 
    routing issue, a bad NIC, bad switchport, loose network cable and a few other 
    things.

    -- 
    With best regards

    Michael Stauber
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.blueonyx.it/pipermail/blueonyx/attachments/20090812/05d52364/attachment.html>